How to use midi knobs for automation?


Sep 1, 2022

Reading Time: 3 Min

In music production, MIDI automation is the process of using MIDI messages to control the changes of sound parameters, such as volume, pitch, and panning, over time. MIDI automation can be used to create dynamic, evolving soundscapes and textures, or to automate the performance of repetitive tasks, such as filter sweeps and delays.

MIDI automation is typically controlled via MIDI controllers, such as knobs, faders, and buttons. These controllers can be hardware devices, such as dedicated MIDI controllers, or they can be virtual controls within a DAW or other music software.

To automate a sound parameter with a MIDI controller, you first need to select the parameter you want to control. This can be done in a DAW or other music software by clicking on the parameter’s name or by using a MIDI learn function.

Next, you need to move the controller to the desired starting value. For example, if you want to automate a filter sweep from a low frequency to a high frequency, you would move the MIDI controller to the lowest value.

Finally, you need to record the automation. This can be done by hitting the record button in your DAW or by using a MIDI sequencer.

Once the automation is recorded, you can play it back at any time by moving the MIDI controller to the desired starting value and hitting the play button.

Other related questions:

How do I automate MIDI?

There are a few ways to automate MIDI:

1. Use a MIDI controller with built-in automation features.

2. Use a DAW with MIDI automation features.

3. Use a MIDI sequencer with automation features.

4. Use a stand-alone MIDI automation tool.

What are the knobs for on a MIDI controller?

Most MIDI controllers will have a variety of knobs that can be used to control various aspects of your music. The specific function of each knob will vary depending on the controller, but they may be used to control the volume, pitch, or other parameters of your sound.

What is MIDI automation?

MIDI automation is the process of using MIDI to control various aspects of a musical performance, such as volume, pitch, tempo, and other parameters. Automation can be used to create more expressive and dynamic performances, and can also be used to automate repetitive tasks such as chord progressions or arpeggios.

How do you use MIDI knobs in logic?

There is no one-size-fits-all answer to this question, as the specific MIDI controller you are using will dictate how you need to set it up in Logic. However, in general, you will need to open the MIDI controller’s preferences pane in Logic, and then map the controller’s knobs to the desired parameters in Logic.


  • Was this Helpful ?
  • YesNo

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *